RS-485 Connection
1) Select USB/RS-485(MSTP) as your communication type.
2) Select Modbus or BACnet as your communication protocol.
3) Enter a base address that matches the switches on the Power Patrol meter.
4) Select the PC COM Port from the drop-down list.
5) Click Connect. Status box will show a connected status.
Default settings are used for the two remaining fields: Data Bits is 8N1 and the Baud Rate is 9600.
NOTE: If HeadStart was installed first, it needs to be restarted following a RS-485 driver installation. If a
RS-485 port does not appear in the drop-down list, the RS-485 was not installed correctly.
Comments to this Manuals