Setra Systems L series Specifications download pdf (Page 17)

Appendix I

Set-Up Functions

Changing Display Update Rate (INT Mode)

The int key is factory preset to provide a rapid display update (short integration time)

for pouring liquids to a target weight. The use of this key can be altered to provide a slow

display update (long integration time) for weighing in the presence of vibration. Follow

the procedure below to change the functionality of the int key to either a slow or a rapid

display update:

1. Press the — key.

2. Enter 11110. This is the INT mode selection access code.

3. Press the cal key. The display will read “INT 1 or 0”.

4. Press 1 for a long integration time (vibration) or press 0 for a short integration

time (filling).

5. Press the cal key.

NOTE: The integration speed selected will remain programmed even if the scale

is off.

FORMATTING BAUD RATE

Your Setra balance is capable of interfacing with a wide variety of computer equipment

or other peripheral devices. To set the baud rate (the rate at which your balance sends

information to a computer or printer), use the following procedure:

1. Press the — key.

2. Enter 5555. This is the baud rate access code.

3. Press the cal key. The display will read “cal br”.

4. Enter the baud rate. Choose either 300, 600, 1200, 2400, 4800 or 9600.

5. Press the cal key.

6. To retain this baud rate after power has been removed, repeat Steps 1-5 above

using the same baud rate.

NOTE: A baud rate of 2400 is automatically assigned when none is formatted.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 30 31

No comments

Setra Systems L series Specifications Page 17